Истина ли е, че може да си направите пуканки с мобилния телефон?

Вижте сами ; )

~ от mitafa на юни 19, 2008.

2 коментара to “Истина ли е, че може да си направите пуканки с мобилния телефон?”

  1. А от одеало може ли да се направи динамит?

  2. Може, но + одеалото ще ти трябва и това:

    1. Take two beakers. In the first, prepare a solution of 76% sulfuric
    acid, 23% nitric acid, and 1% water. In the other beaker, prepare
    another solution of 57% nitric acid and 43% sulfuric acid (percentages
    are on a weight ratio rather than volume).
    2. Ten grams of the first solution are poured into an empty beaker and
    placed in an ice bath.
    3. Add ten grams of toluene, and stir for several minutes.
    4. Remove this beaker from the ice bath and gently heat until it reaches
    50 шC. The solution is stirred constantly while being heated.
    5. Fifty additional grams of the acid, from the first beaker, are added
    and the temperature is allowed to rise to 55 шC. This temperature is
    held for the next ten minutes, and an oily liquid will begin to form
    on the top of the acid.
    6. After 10 or 12 minutes, the acid solution is returned to the ice bath,
    and cooled to 45 шC. When reaching this temperature, the oily liquid
    will sink and collect at the bottom of the beaker. At this point, the
    remaining acid solution should have been drawn off, by using a syringe.
    7. Fifty more grams of the first acid solution are added to the oily
    liquid while the temperature is slowly being raised to 83 шC. After
    this temperature is reached it is maintained for a full half hour.
    8. At the end of this period, the solution is allowed to cool to 60 шC.,
    and is held at this temperature for another full half hour. After this,
    the acid is again drawn off, leaving once more only the oily liquid at
    the bottom.
    9. Thirty grams of sulfuric acid are added, while the oily liquid is
    gently heated to 80 шC. All temperature increases must be accomplished
    slowly and gently.
    10. Once the desired temperature is reached, 30 grams of the second acid
    solution are added, and the temperature is raised from 80 шC. to
    104 шC., and is held for three hours.
    11. After this three-hour period, the mixture is lowered to 100 шC., and is
    held there for a half hour.
    12. After this half hour, the oil is removed from the acid and washed with
    boiling water.
    13. After the washing with boiling water, wHi’e being stirred constantly,
    the TNT will begin to solidify.
    14. When the solidification has started, cold water is added to the beaker,
    so that the TNT will form into pellets. Once this is done, you have a
    good quality TNT.

    ;)

Вашият коментар